Dziwne zachowanie AuthMe

[Asesis]

Witam, mam problem z AuthMeReloaded 5.2-BETA3... Mianowicie, po zalogowaniu lub zarejestrowaniu, następuje długie oczekiwanie na to żeby mógł się w ogóle ruszyć... Co dziwne mogę skakać, sprintować (w miejscu )... Trwa to może 3 sekundy, gdzie mniej więcej w połowie robi się zoom (jak z optifine)... Ktoś może wie o co chodzi? 

 

aa dodam, że w wersji 3.x (nie wiem dokładnie jakiej) wszystko działało ok, oprócz też chwili czekania, aż cokolwiek ruszy...

[jakubgross]

Jaka wersja serwera?

 

Czy konsola coś wywala?

 

Podaj config Authme. 

[Asesis]

Spigot 1.8.8-R0.1-SNAPSHOT
 
Konsola czyściutka.

 

 

DataSource:
    # What type of database do you want to use?
    # Valid values: sqlite, mysql
    backend: 'SQLITE'
    # Enable database caching, should improve database performance
    caching: true
    # Database host address
    mySQLHost: '127.0.0.1'
    # Database port
    mySQLPort: '3306'
    # Username about Database Connection Infos
    mySQLUsername: 'authme'
    # Password about Database Connection Infos
    mySQLPassword: '12345'
    # Database Name, use with converters or as SQLITE database name
    mySQLDatabase: 'authme'
    # Table of the database
    mySQLTablename: 'authme'
    # Column of IDs to sort data
    mySQLColumnId: 'id'
    # Column for storing or checking players nickname
    mySQLColumnName: 'username'
    # Column for storing or checking players RealName
    mySQLRealName: 'realname'
    # Column for storing players passwords
    mySQLColumnPassword: 'password'
    # Column for storing players emails
    mySQLColumnEmail: 'email'
    # Column for storing if a player is logged in or not
    mySQLColumnLogged: 'isLogged'
    # Column for storing players ips
    mySQLColumnIp: 'ip'
    # Column for storing players lastlogins
    mySQLColumnLastLogin: 'lastlogin'
    # Column for storing player LastLocation - X
    mySQLlastlocX: 'x'
    # Column for storing player LastLocation - Y
    mySQLlastlocY: 'y'
    # Column for storing player LastLocation - Z
    mySQLlastlocZ: 'z'
    # Column for storing player LastLocation - World Name
    mySQLlastlocWorld: 'world'
    # Overrides the size of the DB Connection Pool, -1 = Auto
    poolSize: -1
ExternalBoardOptions:
    # Column for storing players passwords salts
    mySQLColumnSalt: ''
    # Column for storing players groups
    mySQLColumnGroup: ''
    # -1 means disabled. If you want that only activated players
    # can log into your server, you can set here the group number
    # of unactivated users, needed for some forum/CMS support
    nonActivedUserGroup: -1
    # Other MySQL columns where we need to put the username (case-sensitive)
    mySQLOtherUsernameColumns: []
    # How much log2 rounds needed in BCrypt (do not change if you do not know what it does)
    bCryptLog2Round: 10
    # phpBB table prefix defined during the phpBB installation process
    phpbbTablePrefix: 'phpbb_'
    # phpBB activated group ID; 2 is the default registered group defined by phpBB
    phpbbActivatedGroupId: 2
    # Wordpress prefix defined during WordPress installation
    wordpressTablePrefix: 'wp_'
Converter:
    Rakamak:
        # Rakamak file name
        fileName: 'users.rak'
        # Rakamak use IP?
        useIP: false
        # Rakamak IP file name
        ipFileName: 'UsersIp.rak'
    CrazyLogin:
        # CrazyLogin database file name
        fileName: 'accounts.db'
settings:
    sessions:
        # Do you want to enable the session feature?
        # If enabled, when a player authenticates successfully,
        # his IP and his nickname is saved.
        # The next time the player joins the server, if his IP
        # is the same as last time and the timeout hasn't
        # expired, he will not need to authenticate.
        enabled: true
        # After how many minutes should a session expire?
        # Remember that sessions will end only after the timeout, and
        # if the player's IP has changed but the timeout hasn't expired,
        # the player will be kicked from the server due to invalid session
        timeout: 5
        # Should the session expire if the player tries to log in with
        # another IP address?
        sessionExpireOnIpChange: true
    # Message language, available: en, de, br, cz, pl, fr, ru, hu, sk, es, zhtw, fi, zhcn, lt, it, ko, pt
    messagesLanguage: 'pl'
    restrictions:
        # Keeps collisions disabled for logged players
        # Works only with MC 1.9
        keepCollisionsDisabled: false
        # Can not authenticated players chat?
        # Keep in mind that this feature also blocks all commands not
        # listed in the list below.
        allowChat: false
        # Hide the chat log from players who are not authenticated?
        hideChat: false
        # Allowed commands for unauthenticated players
        allowCommands: 
        - '/login'
        - '/register'
        - '/l'
        - '/reg'
        - '/email'
        - '/captcha'
        # Max number of allowed registrations per IP
        # The value 0 means an unlimited number of registrations!
        maxRegPerIp: 1
        # Minimum allowed username length
        minNicknameLength: 3
        # Maximum allowed username length
        maxNicknameLength: 16
        # When this setting is enabled, online players can't be kicked out
        # due to "Logged in from another Location"
        # This setting will prevent potential security exploits.
        ForceSingleSession: true
        ForceSpawnLocOnJoin:
            # If enabled, every player that spawn in one of the world listed in "ForceSpawnLocOnJoin.worlds"
            # will be teleported to the spawnpoint after successful authentication.
            # The quit location of the player will be overwritten.
            # This is different from "teleportUnAuthedToSpawn" that teleport player
            # to the spawnpoint on join.
            enabled: false
            # WorldNames where we need to force the spawn location
            # Case-sensitive!
            worlds: 
            - 'world'
            - 'world_nether'
            - 'world_the_end'
        # This option will save the quit location of the players.
        SaveQuitLocation: true
        # To activate the restricted user feature you need
        # to enable this option and configure the AllowedRestrictedUser field.
        AllowRestrictedUser: false
        # The restricted user feature will kick players listed below
        # if they don't match the defined IP address.
        # Example:
        #     AllowedRestrictedUser:
        #     - playername;127.0.0.1
        AllowedRestrictedUser: []
        # Should unregistered players be kicked immediately?
        kickNonRegistered: false
        # Should players be kicked on wrong password?
        kickOnWrongPassword: false
        # Should not logged in players be teleported to the spawn?
        # After the authentication they will be teleported back to
        # their normal position.
        teleportUnAuthedToSpawn: true
        # Can unregistered players walk around?
        allowMovement: false
        # Should not authenticated players have speed = 0?
        # This will reset the fly/walk speed to default value after the login.
        removeSpeed: true
        # After how many seconds should players who fail to login or register
        # be kicked? Set to 0 to disable.
        timeout: 30
        # Regex syntax of allowed characters in the player name.
        allowedNicknameCharacters: '[a-zA-Z0-9_]*'
        # How far can unregistered players walk?
        # Set to 0 for unlimited radius
        allowedMovementRadius: 100
        # Enable double check of password when you register
        # when it's true, registration requires that kind of command:
        # /register <password> <confirmPassword>
        enablePasswordConfirmation: true
        # Should we protect the player inventory before logging in? Requires ProtocolLib.
        ProtectInventoryBeforeLogIn: true
        # Should we deny the tabcomplete feature before logging in? Requires ProtocolLib.
        DenyTabCompleteBeforeLogin: true
        # Should we display all other accounts from a player when he joins?
        # permission: /authme.admin.accounts
        displayOtherAccounts: true
        # Ban ip when the ip is not the ip registered in database
        banUnsafedIP: false
        # Spawn priority; values: authme, essentials, multiverse, default
        spawnPriority: 'essentials,authme,multiverse,default'
        # Maximum Login authorized by IP
        maxLoginPerIp: 0
        # Maximum Join authorized by IP
        maxJoinPerIp: 0
        # AuthMe will NEVER teleport players if set to true!
        noTeleport: false
        # Regex syntax for allowed chars in passwords
        allowedPasswordCharacters: '[\x21-\x7E]*'
    # Log level: INFO, FINE, DEBUG. Use INFO for general messages,
    # FINE for some additional detailed ones (like password failed),
    # and DEBUG for debugging
    logLevel: 'FINE'
    # By default we schedule async tasks when talking to the database
    # If you want typical communication with the database to happen synchronously, set this to false
    useAsyncTasks: true
    GameMode:
        # Force survival gamemode when player joins?
        ForceSurvivalMode: false
    unrestrictions:
        # Below you can list all account names that
        # AuthMe will ignore for registration or login, configure it
        # at your own risk!! Remember that if you are going to add
        # nickname with [], you have to delimit name with ' '.
        # this option add compatibility with BuildCraft and some
        # other mods.
        # It is case-sensitive!
        UnrestrictedName: []
    security:
        # Minimum length of password
        minPasswordLength: 5
        # Maximum length of password
        passwordMaxLength: 30
        # This is a very important option: every time a player joins the server,
        # if they are registered, AuthMe will switch him to unLoggedInGroup.
        # This should prevent all major exploits.
        # You can set up your permission plugin with this special group to have no permissions,
        # or only permission to chat (or permission to send private messages etc.).
        # The better way is to set up this group with few permissions, so if a player
        # tries to exploit an account they can do only what you've defined for the group.
        # After, a logged in player will be moved to his correct permissions group!
        # Please note that the group name is case-sensitive, so 'admin' is different from 'Admin'
        # Otherwise your group will be wiped and the player will join in the default group []!
        # Example unLoggedinGroup: NotLogged
        unLoggedinGroup: 'unLoggedinGroup'
        # Possible values: MD5, SHA1, SHA256, WHIRLPOOL, XAUTH, MD5VB, PHPBB,
        # MYBB, IPB3, PHPFUSION, SMF, XENFORO, SALTED2MD5, JOOMLA, BCRYPT, WBB3, SHA512,
        # DOUBLEMD5, PBKDF2, PBKDF2DJANGO, WORDPRESS, ROYALAUTH, CUSTOM (for developers only)
        passwordHash: 'SHA256'
        # Salt length for the SALTED2MD5 MD5(MD5(password)+salt)
        doubleMD5SaltLength: 8
        # If password checking return false, do we need to check with all
        # other password algorithm to check an old password?
        # AuthMe will update the password to the new password hash
        supportOldPasswordHash: false
        # Prevent unsafe passwords from being used; put them in lowercase!
        # unsafePasswords:
        # - '123456'
        # - 'password'
        unsafePasswords: 
        - '123456'
        - 'password'
        - 'qwerty'
        - '12345'
        - '54321'
        - '123456789'
    registration:
        # Enable registration on the server?
        enabled: true
        # Send every X seconds a message to a player to
        # remind him that he has to login/register
        messageInterval: 5
        # Only registered and logged in players can play.
        # See restrictions for exceptions
        force: true
        # Do we replace password registration by an email registration method?
        enableEmailRegistrationSystem: false
        # Enable double check of email when you register
        # when it's true, registration requires that kind of command:
        # /register <email> <confirmEmail>
        doubleEmailCheck: false
        # Do we force kick a player after a successful registration?
        # Do not use with login feature below
        forceKickAfterRegister: false
        # Does AuthMe need to enforce a /login after a successful registration?
        forceLoginAfterRegister: false
    # Force these commands after /login, without any '/', use %p to replace with player name
    forceCommands: []
    # Force these commands after /login as service console, without any '/'. Use %p to replace with player name
    forceCommandsAsConsole: []
    # Force these commands after /register, without any '/', use %p to replace with player name
    forceRegisterCommands: []
    # Force these commands after /register as a server console, without any '/'. Use %p to replace with player name
    forceRegisterCommandsAsConsole: []
    # Enable to display the welcome message (welcome.txt) after a login
    # You can use colors in this welcome.txt + some replaced strings:
    # {PLAYER}: player name, {ONLINE}: display number of online players, {MAXPLAYERS}: display server slots,
    # {IP}: player ip, {LOGINS}: number of players logged, {WORLD}: player current world, {SERVER}: server name
    # {VERSION}: get current bukkit version, {COUNTRY}: player country
    useWelcomeMessage: false
    # Do we need to broadcast the welcome message to all server or only to the player? set true for server or false for player
    broadcastWelcomeMessage: false
    # Should we delay the join message and display it once the player has logged in?
    delayJoinMessage: false
    # Should we remove the leave messages of unlogged users?
    removeUnloggedLeaveMessage: false
    # Should we remove join messages altogether?
    removeJoinMessage: false
    # Should we remove leave messages altogether?
    removeLeaveMessage: false
    # Do we need to add potion effect Blinding before login/reigster?
    applyBlindEffect: false
    # Do we need to prevent people to login with another case?
    # If Xephi is registered, then Xephi can login, but not XEPHI/xephi/XePhI
    preventOtherCase: false
permission:
    # Take care with this option; if you want
    # to use group switching of AuthMe
    # for unloggedIn players, set this setting to true.
    # Default is false.
    EnablePermissionCheck: false
Email:
    # Email SMTP server host
    mailSMTP: 'smtp.gmail.com'
    # Email SMTP server port
    mailPort: 465
    # Email account which sends the mails
    mailAccount: ''
    # Email account password
    mailPassword: ''
    # Custom sender name, replacing the mailAccount name in the email
    mailSenderName: ''
    # Recovery password length
    RecoveryPasswordLength: 8
    # Mail Subject
    mailSubject: 'Your new AuthMe password'
    # Like maxRegPerIP but with email
    maxRegPerEmail: 1
    # Recall players to add an email?
    recallPlayers: false
    # Delay in minute for the recall scheduler
    delayRecall: 5
    # Blacklist these domains for emails
    emailBlacklisted: 
    - '10minutemail.com'
    # Whitelist ONLY these domains for emails
    emailWhitelisted: []
    # Send the new password drawn in an image?
    generateImage: false
    # The OAuth2 token
    emailOauth2Token: ''
Hooks:
    # Do we need to hook with multiverse for spawn checking?
    multiverse: true
    # Do we need to hook with BungeeCord?
    bungeecord: false
    # Send player to this BungeeCord server after register/login
    sendPlayerTo: ''
    # Do we need to disable Essentials SocialSpy on join?
    disableSocialSpy: true
    # Do we need to force /motd Essentials command on join?
    useEssentialsMotd: false
GroupOptions:
    # Unregistered permission group
    UnregisteredPlayerGroup: ''
    # Registered permission group
    RegisteredPlayerGroup: ''
Protection:
    # Enable some servers protection (country based login, antibot)
    enableProtection: false
    # Apply the protection also to registered usernames
    enableProtectionRegistered: true
    # Countries allowed to join the server and register, see http://dev.bukkit.org/bukkit-plugins/authme-reloaded/pages/countries-codes/ for countries' codes
    # PLEASE USE QUOTES!
    countries: 
    - 'US'
    - 'GB'
    # Countries not allowed to join the server and register
    # PLEASE USE QUOTES!
    countriesBlacklist: 
    - 'A1'
    # Do we need to enable automatic antibot system?
    enableAntiBot: true
    # Max number of players allowed to login in 5 secs before the AntiBot system is enabled automatically
    antiBotSensibility: 10
    # Duration in minutes of the antibot automatic system
    antiBotDuration: 5
    # Delay in seconds before the antibot activation
    antiBotDelay: 60
Purge:
    # If enabled, AuthMe automatically purges old, unused accounts
    useAutoPurge: false
    # Number of Days an account become Unused
    daysBeforeRemovePlayer: 60
    # Do we need to remove the player.dat file during purge process?
    removePlayerDat: false
    # Do we need to remove the Essentials/userdata/player.yml file during purge process?
    removeEssentialsFile: false
    # World where are players.dat stores
    defaultWorld: 'world'
    # Do we need to remove LimitedCreative/inventories/player.yml, player_creative.yml files during purge process ?
    removeLimitedCreativesInventories: false
    # Do we need to remove the AntiXRayData/PlayerData/player file during purge process?
    removeAntiXRayFile: false
    # Do we need to remove permissions?
    removePermissions: false
Security:
    SQLProblem:
        # Stop the server if we can't contact the sql database
        # Take care with this, if you set this to false,
        # AuthMe will automatically disable and the server won't be protected!
        stopServer: true
    ReloadCommand:
        # /reload support
        useReloadCommandSupport: true
    console:
        # Remove passwords from console?
        removePassword: false
        # Copy AuthMe log output in a separate file as well?
        logConsole: true
    captcha:
        # Enable captcha when a player uses wrong password too many times
        useCaptcha: true
        # Max allowed tries before a captcha is required
        maxLoginTry: 5
        # Captcha length
        captchaLength: 5
    tempban:
        # Tempban a user's IP address if they enter the wrong password too many times
        enableTempban: false
        # How many times a user can attempt to login before their IP being tempbanned
        maxLoginTries: 10
        # The length of time a IP address will be tempbanned in minutes
        # Default: 480 minutes, or 8 hours
        tempbanLength: 480
        # How many minutes before resetting the count for failed logins by IP and username
        # Default: 480 minutes (8 hours)
        minutesBeforeCounterReset: 480
    recoveryCode:
        # Number of characters a recovery code should have (0 to disable)
        length: 8
        # How many hours is a recovery code valid for?
        validForHours: 4
BackupSystem:
    # Enable or disable automatic backup
    ActivateBackup: false
    # Set backup at every start of server
    OnServerStart: false
    # Set backup at every stop of server
    OnServerStop: true
    # Windows only mysql installation Path
    MysqlWindowsPath: 'C:\Program Files\MySQL\MySQL Server 5.1\'

[jakubgross]

 

Spigot 1.8.8-R0.1-SNAPSHOT

 

Konsola czyściutka.

 

 

DataSource:
    # What type of database do you want to use?
    # Valid values: sqlite, mysql
    backend: 'SQLITE'
    # Enable database caching, should improve database performance
    caching: true
    # Database host address
    mySQLHost: '127.0.0.1'
    # Database port
    mySQLPort: '3306'
    # Username about Database Connection Infos
    mySQLUsername: 'authme'
    # Password about Database Connection Infos
    mySQLPassword: '12345'
    # Database Name, use with converters or as SQLITE database name
    mySQLDatabase: 'authme'
    # Table of the database
    mySQLTablename: 'authme'
    # Column of IDs to sort data
    mySQLColumnId: 'id'
    # Column for storing or checking players nickname
    mySQLColumnName: 'username'
    # Column for storing or checking players RealName
    mySQLRealName: 'realname'
    # Column for storing players passwords
    mySQLColumnPassword: 'password'
    # Column for storing players emails
    mySQLColumnEmail: 'email'
    # Column for storing if a player is logged in or not
    mySQLColumnLogged: 'isLogged'
    # Column for storing players ips
    mySQLColumnIp: 'ip'
    # Column for storing players lastlogins
    mySQLColumnLastLogin: 'lastlogin'
    # Column for storing player LastLocation - X
    mySQLlastlocX: 'x'
    # Column for storing player LastLocation - Y
    mySQLlastlocY: 'y'
    # Column for storing player LastLocation - Z
    mySQLlastlocZ: 'z'
    # Column for storing player LastLocation - World Name
    mySQLlastlocWorld: 'world'
    # Overrides the size of the DB Connection Pool, -1 = Auto
    poolSize: -1
ExternalBoardOptions:
    # Column for storing players passwords salts
    mySQLColumnSalt: ''
    # Column for storing players groups
    mySQLColumnGroup: ''
    # -1 means disabled. If you want that only activated players
    # can log into your server, you can set here the group number
    # of unactivated users, needed for some forum/CMS support
    nonActivedUserGroup: -1
    # Other MySQL columns where we need to put the username (case-sensitive)
    mySQLOtherUsernameColumns: []
    # How much log2 rounds needed in BCrypt (do not change if you do not know what it does)
    bCryptLog2Round: 10
    # phpBB table prefix defined during the phpBB installation process
    phpbbTablePrefix: 'phpbb_'
    # phpBB activated group ID; 2 is the default registered group defined by phpBB
    phpbbActivatedGroupId: 2
    # Wordpress prefix defined during WordPress installation
    wordpressTablePrefix: 'wp_'
Converter:
    Rakamak:
        # Rakamak file name
        fileName: 'users.rak'
        # Rakamak use IP?
        useIP: false
        # Rakamak IP file name
        ipFileName: 'UsersIp.rak'
    CrazyLogin:
        # CrazyLogin database file name
        fileName: 'accounts.db'
settings:
    sessions:
        # Do you want to enable the session feature?
        # If enabled, when a player authenticates successfully,
        # his IP and his nickname is saved.
        # The next time the player joins the server, if his IP
        # is the same as last time and the timeout hasn't
        # expired, he will not need to authenticate.
        enabled: true
        # After how many minutes should a session expire?
        # Remember that sessions will end only after the timeout, and
        # if the player's IP has changed but the timeout hasn't expired,
        # the player will be kicked from the server due to invalid session
        timeout: 5
        # Should the session expire if the player tries to log in with
        # another IP address?
        sessionExpireOnIpChange: true
    # Message language, available: en, de, br, cz, pl, fr, ru, hu, sk, es, zhtw, fi, zhcn, lt, it, ko, pt
    messagesLanguage: 'pl'
    restrictions:
        # Keeps collisions disabled for logged players
        # Works only with MC 1.9
        keepCollisionsDisabled: false
        # Can not authenticated players chat?
        # Keep in mind that this feature also blocks all commands not
        # listed in the list below.
        allowChat: false
        # Hide the chat log from players who are not authenticated?
        hideChat: false
        # Allowed commands for unauthenticated players
        allowCommands: 
        - '/login'
        - '/register'
        - '/l'
        - '/reg'
        - '/email'
        - '/captcha'
        # Max number of allowed registrations per IP
        # The value 0 means an unlimited number of registrations!
        maxRegPerIp: 1
        # Minimum allowed username length
        minNicknameLength: 3
        # Maximum allowed username length
        maxNicknameLength: 16
        # When this setting is enabled, online players can't be kicked out
        # due to "Logged in from another Location"
        # This setting will prevent potential security exploits.
        ForceSingleSession: true
        ForceSpawnLocOnJoin:
            # If enabled, every player that spawn in one of the world listed in "ForceSpawnLocOnJoin.worlds"
            # will be teleported to the spawnpoint after successful authentication.
            # The quit location of the player will be overwritten.
            # This is different from "teleportUnAuthedToSpawn" that teleport player
            # to the spawnpoint on join.
            enabled: false
            # WorldNames where we need to force the spawn location
            # Case-sensitive!
            worlds: 
            - 'world'
            - 'world_nether'
            - 'world_the_end'
        # This option will save the quit location of the players.
        SaveQuitLocation: true
        # To activate the restricted user feature you need
        # to enable this option and configure the AllowedRestrictedUser field.
        AllowRestrictedUser: false
        # The restricted user feature will kick players listed below
        # if they don't match the defined IP address.
        # Example:
        #     AllowedRestrictedUser:
        #     - playername;127.0.0.1
        AllowedRestrictedUser: []
        # Should unregistered players be kicked immediately?
        kickNonRegistered: false
        # Should players be kicked on wrong password?
        kickOnWrongPassword: false
        # Should not logged in players be teleported to the spawn?
        # After the authentication they will be teleported back to
        # their normal position.
        teleportUnAuthedToSpawn: true
        # Can unregistered players walk around?
        allowMovement: false
        # Should not authenticated players have speed = 0?
        # This will reset the fly/walk speed to default value after the login.
        removeSpeed: true
        # After how many seconds should players who fail to login or register
        # be kicked? Set to 0 to disable.
        timeout: 30
        # Regex syntax of allowed characters in the player name.
        allowedNicknameCharacters: '[a-zA-Z0-9_]*'
        # How far can unregistered players walk?
        # Set to 0 for unlimited radius
        allowedMovementRadius: 100
        # Enable double check of password when you register
        # when it's true, registration requires that kind of command:
        # /register <password> <confirmPassword>
        enablePasswordConfirmation: true
        # Should we protect the player inventory before logging in? Requires ProtocolLib.
        ProtectInventoryBeforeLogIn: true
        # Should we deny the tabcomplete feature before logging in? Requires ProtocolLib.
        DenyTabCompleteBeforeLogin: true
        # Should we display all other accounts from a player when he joins?
        # permission: /authme.admin.accounts
        displayOtherAccounts: true
        # Ban ip when the ip is not the ip registered in database
        banUnsafedIP: false
        # Spawn priority; values: authme, essentials, multiverse, default
        spawnPriority: 'essentials,authme,multiverse,default'
        # Maximum Login authorized by IP
        maxLoginPerIp: 0
        # Maximum Join authorized by IP
        maxJoinPerIp: 0
        # AuthMe will NEVER teleport players if set to true!
        noTeleport: false
        # Regex syntax for allowed chars in passwords
        allowedPasswordCharacters: '[\x21-\x7E]*'
    # Log level: INFO, FINE, DEBUG. Use INFO for general messages,
    # FINE for some additional detailed ones (like password failed),
    # and DEBUG for debugging
    logLevel: 'FINE'
    # By default we schedule async tasks when talking to the database
    # If you want typical communication with the database to happen synchronously, set this to false
    useAsyncTasks: true
    GameMode:
        # Force survival gamemode when player joins?
        ForceSurvivalMode: false
    unrestrictions:
        # Below you can list all account names that
        # AuthMe will ignore for registration or login, configure it
        # at your own risk!! Remember that if you are going to add
        # nickname with [], you have to delimit name with ' '.
        # this option add compatibility with BuildCraft and some
        # other mods.
        # It is case-sensitive!
        UnrestrictedName: []
    security:
        # Minimum length of password
        minPasswordLength: 5
        # Maximum length of password
        passwordMaxLength: 30
        # This is a very important option: every time a player joins the server,
        # if they are registered, AuthMe will switch him to unLoggedInGroup.
        # This should prevent all major exploits.
        # You can set up your permission plugin with this special group to have no permissions,
        # or only permission to chat (or permission to send private messages etc.).
        # The better way is to set up this group with few permissions, so if a player
        # tries to exploit an account they can do only what you've defined for the group.
        # After, a logged in player will be moved to his correct permissions group!
        # Please note that the group name is case-sensitive, so 'admin' is different from 'Admin'
        # Otherwise your group will be wiped and the player will join in the default group []!
        # Example unLoggedinGroup: NotLogged
        unLoggedinGroup: 'unLoggedinGroup'
        # Possible values: MD5, SHA1, SHA256, WHIRLPOOL, XAUTH, MD5VB, PHPBB,
        # MYBB, IPB3, PHPFUSION, SMF, XENFORO, SALTED2MD5, JOOMLA, BCRYPT, WBB3, SHA512,
        # DOUBLEMD5, PBKDF2, PBKDF2DJANGO, WORDPRESS, ROYALAUTH, CUSTOM (for developers only)
        passwordHash: 'SHA256'
        # Salt length for the SALTED2MD5 MD5(MD5(password)+salt)
        doubleMD5SaltLength: 8
        # If password checking return false, do we need to check with all
        # other password algorithm to check an old password?
        # AuthMe will update the password to the new password hash
        supportOldPasswordHash: false
        # Prevent unsafe passwords from being used; put them in lowercase!
        # unsafePasswords:
        # - '123456'
        # - 'password'
        unsafePasswords: 
        - '123456'
        - 'password'
        - 'qwerty'
        - '12345'
        - '54321'
        - '123456789'
    registration:
        # Enable registration on the server?
        enabled: true
        # Send every X seconds a message to a player to
        # remind him that he has to login/register
        messageInterval: 5
        # Only registered and logged in players can play.
        # See restrictions for exceptions
        force: true
        # Do we replace password registration by an email registration method?
        enableEmailRegistrationSystem: false
        # Enable double check of email when you register
        # when it's true, registration requires that kind of command:
        # /register <email> <confirmEmail>
        doubleEmailCheck: false
        # Do we force kick a player after a successful registration?
        # Do not use with login feature below
        forceKickAfterRegister: false
        # Does AuthMe need to enforce a /login after a successful registration?
        forceLoginAfterRegister: false
    # Force these commands after /login, without any '/', use %p to replace with player name
    forceCommands: []
    # Force these commands after /login as service console, without any '/'. Use %p to replace with player name
    forceCommandsAsConsole: []
    # Force these commands after /register, without any '/', use %p to replace with player name
    forceRegisterCommands: []
    # Force these commands after /register as a server console, without any '/'. Use %p to replace with player name
    forceRegisterCommandsAsConsole: []
    # Enable to display the welcome message (welcome.txt) after a login
    # You can use colors in this welcome.txt + some replaced strings:
    # {PLAYER}: player name, {ONLINE}: display number of online players, {MAXPLAYERS}: display server slots,
    # {IP}: player ip, {LOGINS}: number of players logged, {WORLD}: player current world, {SERVER}: server name
    # {VERSION}: get current bukkit version, {COUNTRY}: player country
    useWelcomeMessage: false
    # Do we need to broadcast the welcome message to all server or only to the player? set true for server or false for player
    broadcastWelcomeMessage: false
    # Should we delay the join message and display it once the player has logged in?
    delayJoinMessage: false
    # Should we remove the leave messages of unlogged users?
    removeUnloggedLeaveMessage: false
    # Should we remove join messages altogether?
    removeJoinMessage: false
    # Should we remove leave messages altogether?
    removeLeaveMessage: false
    # Do we need to add potion effect Blinding before login/reigster?
    applyBlindEffect: false
    # Do we need to prevent people to login with another case?
    # If Xephi is registered, then Xephi can login, but not XEPHI/xephi/XePhI
    preventOtherCase: false
permission:
    # Take care with this option; if you want
    # to use group switching of AuthMe
    # for unloggedIn players, set this setting to true.
    # Default is false.
    EnablePermissionCheck: false
Email:
    # Email SMTP server host
    mailSMTP: 'smtp.gmail.com'
    # Email SMTP server port
    mailPort: 465
    # Email account which sends the mails
    mailAccount: ''
    # Email account password
    mailPassword: ''
    # Custom sender name, replacing the mailAccount name in the email
    mailSenderName: ''
    # Recovery password length
    RecoveryPasswordLength: 8
    # Mail Subject
    mailSubject: 'Your new AuthMe password'
    # Like maxRegPerIP but with email
    maxRegPerEmail: 1
    # Recall players to add an email?
    recallPlayers: false
    # Delay in minute for the recall scheduler
    delayRecall: 5
    # Blacklist these domains for emails
    emailBlacklisted: 
    - '10minutemail.com'
    # Whitelist ONLY these domains for emails
    emailWhitelisted: []
    # Send the new password drawn in an image?
    generateImage: false
    # The OAuth2 token
    emailOauth2Token: ''
Hooks:
    # Do we need to hook with multiverse for spawn checking?
    multiverse: true
    # Do we need to hook with BungeeCord?
    bungeecord: false
    # Send player to this BungeeCord server after register/login
    sendPlayerTo: ''
    # Do we need to disable Essentials SocialSpy on join?
    disableSocialSpy: true
    # Do we need to force /motd Essentials command on join?
    useEssentialsMotd: false
GroupOptions:
    # Unregistered permission group
    UnregisteredPlayerGroup: ''
    # Registered permission group
    RegisteredPlayerGroup: ''
Protection:
    # Enable some servers protection (country based login, antibot)
    enableProtection: false
    # Apply the protection also to registered usernames
    enableProtectionRegistered: true
    # Countries allowed to join the server and register, see http://dev.bukkit.org/bukkit-plugins/authme-reloaded/pages/countries-codes/ for countries' codes
    # PLEASE USE QUOTES!
    countries: 
    - 'US'
    - 'GB'
    # Countries not allowed to join the server and register
    # PLEASE USE QUOTES!
    countriesBlacklist: 
    - 'A1'
    # Do we need to enable automatic antibot system?
    enableAntiBot: true
    # Max number of players allowed to login in 5 secs before the AntiBot system is enabled automatically
    antiBotSensibility: 10
    # Duration in minutes of the antibot automatic system
    antiBotDuration: 5
    # Delay in seconds before the antibot activation
    antiBotDelay: 60
Purge:
    # If enabled, AuthMe automatically purges old, unused accounts
    useAutoPurge: false
    # Number of Days an account become Unused
    daysBeforeRemovePlayer: 60
    # Do we need to remove the player.dat file during purge process?
    removePlayerDat: false
    # Do we need to remove the Essentials/userdata/player.yml file during purge process?
    removeEssentialsFile: false
    # World where are players.dat stores
    defaultWorld: 'world'
    # Do we need to remove LimitedCreative/inventories/player.yml, player_creative.yml files during purge process ?
    removeLimitedCreativesInventories: false
    # Do we need to remove the AntiXRayData/PlayerData/player file during purge process?
    removeAntiXRayFile: false
    # Do we need to remove permissions?
    removePermissions: false
Security:
    SQLProblem:
        # Stop the server if we can't contact the sql database
        # Take care with this, if you set this to false,
        # AuthMe will automatically disable and the server won't be protected!
        stopServer: true
    ReloadCommand:
        # /reload support
        useReloadCommandSupport: true
    console:
        # Remove passwords from console?
        removePassword: false
        # Copy AuthMe log output in a separate file as well?
        logConsole: true
    captcha:
        # Enable captcha when a player uses wrong password too many times
        useCaptcha: true
        # Max allowed tries before a captcha is required
        maxLoginTry: 5
        # Captcha length
        captchaLength: 5
    tempban:
        # Tempban a user's IP address if they enter the wrong password too many times
        enableTempban: false
        # How many times a user can attempt to login before their IP being tempbanned
        maxLoginTries: 10
        # The length of time a IP address will be tempbanned in minutes
        # Default: 480 minutes, or 8 hours
        tempbanLength: 480
        # How many minutes before resetting the count for failed logins by IP and username
        # Default: 480 minutes (8 hours)
        minutesBeforeCounterReset: 480
    recoveryCode:
        # Number of characters a recovery code should have (0 to disable)
        length: 8
        # How many hours is a recovery code valid for?
        validForHours: 4
BackupSystem:
    # Enable or disable automatic backup
    ActivateBackup: false
    # Set backup at every start of server
    OnServerStart: false
    # Set backup at every stop of server
    OnServerStop: true
    # Windows only mysql installation Path
    MysqlWindowsPath: 'C:\Program Files\MySQL\MySQL Server 5.1\'

 

To dziwne, plugin powinien działać bez problemu. Musisz spróbować zainstalować starszą wersję, nie używaj bazy danych, zapisywanie na dysku jest lepsze (flat). Spróbuj to zmienić. 

[Asesis]

No ok spróbuję

Czyli muszę zmienić tutaj? 

# Enable database caching, should improve database performance
    caching: true

[jakubgross]

 

No ok spróbuję

Czyli muszę zmienić tutaj? 

# Enable database caching, should improve database performance
    caching: true

Tak. 

[Asesis]

To nic nie daje... ciągle to samo, teraz nie mam możliwości włączenie serwera, ale wydaje mi się, że jak robiłem to wcześniej to w konsoli przy uruchamianiu AuthMe i tak wyświetlało się, że połączono z bazą danych... jeszcze to dokładnie sprawdzę wieczorem ;/

[jakubgross]

To nic nie daje... ciągle to samo, teraz nie mam możliwości włączenie serwera, ale wydaje mi się, że jak robiłem to wcześniej to w konsoli przy uruchamianiu AuthMe i tak wyświetlało się, że połączono z bazą danych... jeszcze to dokładnie sprawdzę wieczorem ;/

Po prostu usuń dane do logowania (bazy) i już się nie połączy.

[Asesis]

Dziwne... zmieniłem caching na false, usunąłem dane logowania z configu, a w konsoli mimo to wyświetla SQLite driver loaded i SQLite setup finished. Tak samo jak bym nic nie zmieniał... 

 

Nie wiem może zmienić wersje na 3.4?...

[jakubgross]

Dziwne... zmieniłem caching na false, usunąłem dane logowania z configu, a w konsoli mimo to wyświetla SQLite driver loaded i SQLite setup finished. Tak samo jak bym nic nie zmieniał... 

 

Nie wiem może zmienić wersje na 3.4?...

Tak spróbuj zmienić wersję i pamiętaj o usunięciu poprzedniego folderu AuthMe i pliku jar oczywiście. 

[Asesis]

Z tego co pamiętam ta wersja była bardzo stabilna, ale czy już nie jest przestarzała... Let's see

[Oldis]

 Taka ,,ścinka" występuje tylko i wyłącznie dla gracza, który się loguje czy serwer (inni gracze) odczuwa ją także?

[Asesis]

Znaczy się powiem tak, nie wiem Raczej nie, bo to nie jest lag serwera tylko tak jakby opcja w pluginie.. na prawdę tak to wygląda... bo mogę się ruszać (tzn. tylko skakać, i sprintować podczas skoku) i jeszcze ten zoom, podczas którego mogę też znowu zoomować optifinem... WTF?! 

[Revision342]

Autor authme od nowszych wersji dodał coś takiego, że przed zalogowaniem ustawia Ci prędkość poruszania na 0, czyli nie możesz się w ogóle ruszać. Można to wyłączyć w configu:

Linia 124: removeSpeed: ustaw na false