[Pytanie]Konfiguracja JTS3Bots 5.5

[Dizar]

Witam, szukam pomocy przy konfiguracji JTS3bot w tej nowej wersji. Wiem na mpc jest poradnik ale obecna wersja w ogóle nie ma nic podobnego  

 

No jeśli możesz to mam tak 1 plik  JTS3ServerMOD_server.cfg

 

 

 

# Config file of the JTS3ServerMod

# http://www.stefan1200.de

# This file must be saved with the encoding ISO-8859-1!

 

# Teamspeak 3 server address

ts3_server_address = ts3.server.net

# Teamspeak 3 server query port, default is 10011

ts3_server_query_port = 10011

# Teamspeak 3 server query admin account name

ts3_server_query_login = serveradmin

# Teamspeak 3 server query admin password

ts3_server_query_password = password

# Teamspeak 3 virtual server ID or -1 to use ts3_virtualserver_port

ts3_virtualserver_id = -1

# Teamspeak 3 virtual server port, only needed if ts3_virtualserver_id is set to -1

ts3_virtualserver_port = 9987

 

# Channel id, the bot will join into it after connecting. If not wanted, use a negative number like -1.

# Don't set the default channel here, because the bot is already in the default channel after connecting.

bot_channel_id = -1

# Activate the slow mode of the bot, 0 = disable, 1 = enable.

# If slow mode is activated, the bot connects slower to the server

# and disables some bot features to reduce the amount of needed commands.

# This feature may allow you to use the bot without whitelist the bot IP address.

# Slow mode disables the bad channel name check, channel notify, client auto move, client database cache,

# server group notify, welcome message and do not allow the bot check interval to be lower than 3 seconds.

bot_slowmode = 0

# Check every X seconds, default is 1. Values between 1 and 30 are allowed.

# If slow mode is activated, 3 is the lowest possible value.

bot_check_interval = 1

# A different encoding of the messages config files.

# Default is UTF-8 which should be good for all EU and US languages.

# Change this only if you know what you are doing!

# For English or German language you can also use the encoding ISO-8859-1

# A list of all valid ones: http://java.sun.com/j2se/1.5.0/docs/guide/intl/encoding.doc.html

bot_messages_encoding = UTF-8

# This enables the client database list cache. This cache is needed for commands like !searchip. 1 = Enable, 0 = Disable

bot_clientdblist_cache = 1

# This enables the global message variables. See readme file for a list of variables. 1 = Enable, 0 = Disable

# If enabled, you can use all server variables in all messages. If not needed, disable this to save performance.

bot_global_message_vars = 0

# Server Query name, this will be displayed as name of the connection.

bot_server_query_name = JTS3ServerMod

# Second Server Query name, this will be displayed as name of the connection.

# This name will be used, if the first name is already in use.

bot_server_query_name_2 = MyJTS3ServerMod

# Change the date pattern, which will be used to format a date in chat functions and welcome message.

# To get help how to make such a pattern, look here: http://java.sun.com/j2se/1.5.0/docs/api/java/text/SimpleDateFormat.html

bot_date_pattern = yyyy-MM-dd HH:mm:ss

# Should the bot try to connect forever if the Teamspeak server or the bot is offline? 0 = disable, 1 = enable

bot_connect_forever = 0

# Minimum log level, how much details you want to be written to the bot log files? Default is 1.

# Higher log levels will be also written, as an example: You set log level to 2, level 2, 3 and critical errors will be written to bot log file.

# 0 = Debug

# 1 = Information (recommended and default)

# 2 = Warning (recommended for smaller log files)

# 3 = Error (experts only)

bot_log_level = 1

# A comma separated list (without spaces) of unique user ids, which should be able to use bot admin commands.

# The unique user ids looks like this: mBbHRXwDAG7R19Rv3PorhMwbZW4=

bot_admin_list = 

 

# Set a comma separated list (without spaces) of needed bot functions here.

# Each function needs the function class and the function name, both separated with a colon.

# All possible function classes are listed below, that class is case sensitive!

# That function name you choose is important and has to be unique. It will be used as prefix for the configuration key names and chat commands.

# Don't use spaces in the function names, only use letters, numbers, minus and underscore!

# Most functions allow multiple usage, that allows you to set as many welcome messages or idle check rules, as you want.

# Don't forget that you have to put all settings of the functions in this file.

# Hint: Start the bot with the argument -updateconfig after adding bot functions, that writes the configuration for all functions into this file!

# Whole command: java -jar JTS3ServerMod.jar -updateconfig

# Notice: This -updateconfig will also delete all lines of removed or renamed functions in this config file!

# For more information about the functions read documents/ConfigHelp.html or documents/ConfigHelp_deutsch.html!

# Example: IdleCheck:idle,IdleCheck:idle_guest,MuteMover:mute,WelcomeMessage:welcome,WelcomeMessage:welcome_guest

# This example gives you the following:

# - Two IdleCheck with the name idle and idle_guest

# - One MuteMover with the name mute

# - Two WelcomeMessage with the name welcome and welcome_guest

# 

# Function list (use only once!):

# AutoMove - Move connecting clients of a specified server group to a specified channel

# LastSeen - Chat command to check the last online time of a client (client database list cache must be enabled!)

# 

# Function list (multiple use possible):

# Advertising - Send messages to channel or server chat every X minutes

# AwayMover - Move the client as soon as away status is set for longer than X seconds

# BadChannelNameCheck - Checking for bad channel names, can delete the channel and punish the client

# BadNicknameCheck - Checking for bad nicknames and can punish the client

# ChannelNotify - Notify specified server groups about clients joining a specified channel

# IdleCheck - Move or kick an idle client, can also send an idle warning message

# InactiveChannelCheck - Delete channels if empty for more than X hours

# MuteMover - Move the client as soon as the specified mute status is set for longer than X seconds

# RecordCheck - Move or kick a recording client (of course only the record function of the Teamspeak client is detected)

# ServerGroupNotify - Notify specified server groups about clients of specified server groups connecting to the TS3 server

# ServerGroupProtection - Make sure that only specified clients are members of the specified server groups

# WelcomeMessage - Sends a message to new connected clients

bot_functions = 

 

 

Zaś drugi plik wygląda tak " jts3servermod_server_example.cfg

 

# Config file of the JTS3ServerMod

# http://www.stefan1200.de

# This file must be saved with the encoding ISO-8859-1!

 

# Teamspeak 3 server address

ts3_server_address = ts3.server.net

# Teamspeak 3 server query port, default is 10011

ts3_server_query_port = 10011

# Teamspeak 3 server query admin account name

ts3_server_query_login = serveradmin

# Teamspeak 3 server query admin password

ts3_server_query_password = password

# Teamspeak 3 virtual server ID or -1 to use ts3_virtualserver_port

ts3_virtualserver_id = -1

# Teamspeak 3 virtual server port, only needed if ts3_virtualserver_id is set to -1

ts3_virtualserver_port = 9987

 

# Channel id, the bot will join into it after connecting. If not wanted, use a negative number like -1.

# Don't set the default channel here, because the bot is already in the default channel after connecting.

bot_channel_id = -1

# Activate the slow mode of the bot, 0 = disable, 1 = enable.

# If slow mode is activated, the bot connects slower to the server

# and disables some bot features to reduce the amount of needed commands.

# This feature may allow you to use the bot without whitelist the bot IP address.

# Slow mode disables the bad channel name check, channel notify, client auto move, client database cache,

# server group notify, welcome message and do not allow the bot check interval to be lower than 3 seconds.

bot_slowmode = 0

# Check every X seconds, default is 1. Values between 1 and 30 are allowed.

# If slow mode is activated, 3 is the lowest possible value.

bot_check_interval = 1

# A different encoding of the messages config files.

# Default is UTF-8 which should be good for all EU and US languages.

# Change this only if you know what you are doing!

# For English or German language you can also use the encoding ISO-8859-1

# A list of all valid ones: http://java.sun.com/j2se/1.5.0/docs/guide/intl/encoding.doc.html

bot_messages_encoding = UTF-8

# This enables the client database list cache. This cache is needed for commands like !searchip. 1 = Enable, 0 = Disable

bot_clientdblist_cache = 1

# This enables the global message variables. See readme file for a list of variables. 1 = Enable, 0 = Disable

# If enabled, you can use all server variables in all messages. If not needed, disable this to save performance.

bot_global_message_vars = 0

# Server Query name, this will be displayed as name of the connection.

bot_server_query_name = JTS3ServerMod

# Second Server Query name, this will be displayed as name of the connection.

# This name will be used, if the first name is already in use.

bot_server_query_name_2 = MyJTS3ServerMod

# Change the date pattern, which will be used to format a date in chat functions and welcome message.

# To get help how to make such a pattern, look here: http://java.sun.com/j2se/1.5.0/docs/api/java/text/SimpleDateFormat.html

bot_date_pattern = yyyy-MM-dd HH:mm:ss

# Should the bot try to connect forever if the Teamspeak server or the bot is offline? 0 = disable, 1 = enable

bot_connect_forever = 0

# Minimum log level, how much details you want to be written to the bot log files? Default is 1.

# Higher log levels will be also written, as an example: You set log level to 2, level 2, 3 and critical errors will be written to bot log file.

# 0 = Debug

# 1 = Information (recommended and default)

# 2 = Warning (recommended for smaller log files)

# 3 = Error (experts only)

bot_log_level = 1

# A comma separated list (without spaces) of unique user ids, which should be able to use bot admin commands.

# The unique user ids looks like this: mBbHRXwDAG7R19Rv3PorhMwbZW4=

bot_admin_list = 

 

# Set a comma separated list (without spaces) of needed bot functions here.

# Each function needs the function class and the function name, both separated with a colon.

# All possible function classes are listed below, that class is case sensitive!

# That function name you choose is important and has to be unique. It will be used as prefix for the configuration key names and chat commands.

# Don't use spaces in the function names, only use letters, numbers, minus and underscore!

# Most functions allow multiple usage, that allows you to set as many welcome messages or idle check rules, as you want.

# Don't forget that you have to put all settings of the functions in this file.

# Hint: Start the bot with the argument -updateconfig after adding bot functions, that writes the configuration for all functions into this file!

# Whole command: java -jar JTS3ServerMod.jar -updateconfig

# Notice: This -updateconfig will also delete all lines of removed or renamed functions in this config file!

# For more information about the functions read documents/ConfigHelp.html or documents/ConfigHelp_deutsch.html!

# Example: IdleCheck:idle,IdleCheck:idle_guest,MuteMover:mute,WelcomeMessage:welcome,WelcomeMessage:welcome_guest

# This example gives you the following:

# - Two IdleCheck with the name idle and idle_guest

# - One MuteMover with the name mute

# - Two WelcomeMessage with the name welcome and welcome_guest

# 

# Function list (use only once!):

# AutoMove - Move connecting clients of a specified server group to a specified channel

# LastSeen - Chat command to check the last online time of a client (client database list cache must be enabled!)

# 

# Function list (multiple use possible):

# Advertising - Send messages to channel or server chat every X minutes

# AwayMover - Move the client as soon as away status is set for longer than X seconds

# BadChannelNameCheck - Checking for bad channel names, can delete the channel and punish the client

# BadNicknameCheck - Checking for bad nicknames and can punish the client

# ChannelNotify - Notify specified server groups about clients joining a specified channel

# IdleCheck - Move or kick an idle client, can also send an idle warning message

# InactiveChannelCheck - Delete channels if empty for more than X hours

# MuteMover - Move the client as soon as the specified mute status is set for longer than X seconds

# RecordCheck - Move or kick a recording client (of course only the record function of the Teamspeak client is detected)

# ServerGroupNotify - Notify specified server groups about clients of specified server groups connecting to the TS3 server

# ServerGroupProtection - Make sure that only specified clients are members of the specified server groups

# WelcomeMessage - Sends a message to new connected clients

bot_functions = Advertising:advertising,AutoMove:automove,AwayMover:away,BadChannelNameCheck:badchannelname,BadNicknameCheck:badnickname,ChannelNotify:channelnotify,IdleCheck:idle,InactiveChannelCheck:icc,LastSeen:lastseen,MuteMover:mute,RecordCheck:record,ServerGroupNotify:servergroupnotify,ServerGroupProtection:servergroupprotection,WelcomeMessage:welcome,WelcomeMessage:welcome_guest

 

 

# Is the target of the advertising messages a channel or a server? Possible values (just write one of the both words!): channel or server

advertising_mode = server

# If a channel is the target, set channel id to write advertising message into it

advertising_channel_id = 

# Advertise every X minutes

advertising_repeat_time = 30

# Path to file which contains the advertising messages.

advertising_file = config/advertising.cfg

 

# Select the message mode, how the clients should get the message.

# poke, chat or none are valid values!

automove_message_mode = chat

# Path to file which contains the auto move configuration and message.

automove_file = config/automove.cfg

 

# Move client back if not away anymore? Set yes or no here!

away_moveback = yes

# Channel id to move away clients into it

away_channel_id = 

# Idle time in seconds after the client with away status will be moved to the channel.

# Has between 0 and 10000 seconds!

away_delay = 5

# A comma separated list (without spaces) of channel ids.

# Depends on the given mode, this channels can be ignored or only this channels will be checked!

# If no channels should be ignored, set no channels here and select the channel list mode ignore!

away_channel_list = 

# Select one of the two modes for the channel list.

# ignore = The selected channels will be ignored.

# only = Only the selected channels will be checked.

away_channel_list_mode = ignore

# A comma separated list (without spaces) of server group ids.

# Depends on the given mode, this server groups can be ignored or only this server groups will be checked!

# If no server groups should be ignored, set no server groups here and select the group list mode ignore!

away_group_list = 

# Select one of the two modes for the server group list.

# ignore = The selected server groups will be ignored.

# only = Only the selected server groups will be checked.

away_group_list_mode = ignore

# Select the message mode, how the client should get the message.

# poke, chat or none are valid values!

away_message_mode = none

# Path to file which contains the away mover message

away_file = config/awaymessages.cfg

 

# Instantly kick client that creates a channel with a bad name? Set yes or no here!

badchannelname_kick = no

# Instantly delete a channel with a bad name? Set always, onlynew or no here!

# onlynew = Try to rename channel back first. Only if that fail (maybe channel is quite new and the old name is unknown) the channel will be deleted!

# no = Try to rename channel back, but the channel will not be deleted!

badchannelname_delete = onlynew

# A comma separated list (without spaces) of channel ids.

# This channels will be ignored!

badchannelname_channel_list = 

# Add complain entry to the user? Set yes or no here!

badchannelname_add_complain = no

# A comma separated list (without spaces) of server group ids.

# Depends on the given mode, this server groups can be ignored or only this server groups will be checked!

# If no server groups should be ignored, set no server groups here and select the group list mode ignore!

badchannelname_group_list = 

# Select one of the two modes for the server group list.

# ignore = The selected server groups will be ignored and can create channels with bad channel names.

# only = Only the selected server groups will be checked.

badchannelname_group_list_mode = ignore

# Select the message mode, how the client should get the message.

# poke, chat or none are valid values!

# If client kick is activated, the message will be always used as kick message!

badchannelname_message_mode = poke

# Path to file which contains the Bad Channel Name Check rules and the message.

badchannelname_file = config/badchannelname.cfg

 

# Kick client with a bad nickname? Set yes or no here!

badnickname_kick = yes

# Add complain entry to the user? Set yes or no here!

badnickname_add_complain = no

# A comma separated list (without spaces) of server group ids.

# Depends on the given mode, this server groups can be ignored or only this server groups will be checked!

# If no server groups should be ignored, set no server groups here and select the group list mode ignore!

badnickname_group_list = 

# Select one of the two modes for the server group list.

# ignore = The selected server groups will be ignored and can have bad nicknames.

# only = Only the selected server groups will be checked.

badnickname_group_list_mode = ignore

# Select the message mode, how the client should get the message.

# poke or chat are valid values!

# If client kick is activated, the message will be always used as kick message!

badnickname_message_mode = poke

# Path to file which contains the bad nickname message and check rules.

badnickname_file = config/badnickname.cfg

 

# Channel id that should be watched for new clients. You can only set one channel id here!

channelnotify_channel_id = 

# A comma separated list (without spaces) of server group ids.

# Depends on the given mode, this server groups can be ignored or only this server groups will be watched!

# If no server groups should be ignored, set no server groups here and select the group list mode ignore!

channelnotify_group_list = 

# Select one of the two modes for the server group list.

# ignore = The selected server groups will be ignored.

# only = Send a notify message only if the selected server groups join the channel.

channelnotify_group_list_mode = ignore

# A comma separated list (without spaces) of server group ids, which should be notified about new clients in the specified channel.

channelnotify_grouptargets = 

# A comma separated list (without spaces) of channel ids.

# Depends on the given mode, target clients in this channels can be ignored or only clients in this channels receive the notify message!

# If no channels should be ignored, set no channels here and select the channel list mode ignore!

channelnotify_channel_list = 

# Select one of the two modes for the channel list.

# ignore = Clients in the selected channels will be ignored.

# only = Only clients in the selected channels receive the notify message.

channelnotify_channel_list_mode = ignore

# Select the message mode, how the notified clients should get the message.

# poke or chat are valid values!

channelnotify_message_mode = poke

# Select the message mode, how the clients (who joined the channel) should get the message.

# poke, chat or none are valid values!

channelnotify_messagenotified_mode = none

# Path to file which contains the channel notify message

channelnotify_file = config/channelnotifymessages.cfg

 

# Select the action if a client is idle for more than the specified maximum time, possible values: kick and move

idle_action = move

# If clients got moved, move client back if not idle anymore? Set yes or no here!

idle_moveback = no

# If clients should be moved, set channel id to move idle clients into it.

idle_channel_id = 

# A comma separated list (without spaces) of channel ids.

# Depends on the given mode, this channels can be ignored or only this channels will be checked!

# If no channels should be ignored, set no channels here and select the channel list mode ignore!

idle_channel_list = 

# Select one of the two modes for the channel list.

# ignore = The selected channels will be ignored.

# only = Only the selected channels will be checked.

idle_channel_list_mode = ignore

# A comma separated list (without spaces) of server group ids.

# Depends on the given mode, this server groups can be ignored or only this server groups will be checked!

# If no server groups should be ignored, set no server groups here and select the group list mode ignore!

idle_group_list = 

# Select one of the two modes for the server group list.

# ignore = The selected server groups will be ignored.

# only = Only the selected server groups will be checked.

idle_group_list_mode = ignore

# Set the max idle time in minutes.

# If clients should be kicked, the client will be kicked after being idle for this time.

# If clients should be moved, the client will be moved to specified channel after being idle for this time!

idle_max_time = 60

# If clients should be moved, set the max idle time in minutes to kick someone.

# Has to be greater than idle_max_time or -1 to disable this feature!

idle_second_max_time = -1

# Set the idle warn time in minutes or set -1 to disable this feature.

# The idle warn time has to be smaller than the max idle time

idle_warn_time = -1

# A minimum client count to activate the idle check (Query clients are not counted).

# If less clients are in the channel or on the server, idle check does nothing.

idle_min_clients = 3

# Select if the minimum client count is needed in the channel or on the server.

# channel or server are valid values!

idle_min_clients_mode = channel

# If clients should be moved, select the message mode, how the client should get the message.

# poke, chat or none are valid values!

idle_message_mode = chat

# Select the message mode, how the client should get the message.

# poke or chat are valid values!

idle_warn_message_mode = chat

# Path to file which contains the idle messages

idle_file = config/idlemessages.cfg

 

# After how many hours an empty channel should be deleted? Possible values between 1 and 2200 hours.

icc_emptydeletetime = 168

# Never delete permanent channels? Set yes or no here!

icc_ignore_permanent = yes

# Never delete semi permanent channels? Set yes or no here!

icc_ignore_semipermanent = no

# A comma separated list (without spaces) of channel ids you like to ignore. This channels don't get deleted!

icc_ignore_channels = 

# A comma separated list (without spaces) of parent channel ids (use 0 for the top level).

# Depends on the given mode, all sub-channels of this channels can be ignored or only sub-channels of this channels will be checked!

# If no parent channels should be ignored, set no channels here and select the channel list mode ignore!

icc_parentchannel_list = 

# Select one of the two modes for the parent channel list.

# ignore = All sub-channels of the selected channels will be ignored.

# only = Only sub-channels of the selected channels will be checked.

# parentonly = Only the parent channels will be checked (and will delete all sub channels).

icc_parentchannel_list_mode = ignore

 

# Who should be able to use the last seen command? Possible values: all, botadmin, servergroup

# This command only works if the bot_clientdblist_cache is enabled!

lastseen_user = botadmin

# A comma separated list (without spaces) of server group ids.

# Depends on the given mode, this server groups can be ignored or only this server groups will be allowed to use the !lastseen command!

# This is only needed, if user servergroup is selected!

lastseen_group_list = 

# Select one of the two modes for the server group list.

# ignore = The selected server groups will be ignored.

# only = Only the selected server groups are allowed to use the !lastseen command!

lastseen_group_list_mode = ignore

 

# Move client back if not muted anymore? Set yes or no here!

mute_moveback = yes

# Enable move if headphone is muted, yes or no

mute_headphone = no

# Enable move if microphone is muted, yes or no

mute_microphone = no

# Enable move if headphone hardware is disabled, yes or no

mute_headphone_hardware = no

# Enable move if microphone hardware is disabled, yes or no

# This also happen if someone is speaking in another TS3 client server tab.

mute_microphone_hardware = no

# Move the client if the client has all selected conditions or at least one? Set all or one here!

mute_condition_mode = one

# Channel id to move muted clients into it

mute_channel_id = 

# Idle time in seconds after the client with a specified mute status will be moved to the channel.

# Has between 0 and 10000 seconds!

mute_delay = 5

# A comma separated list (without spaces) of channel ids.

# Depends on the given mode, this channels can be ignored or only this channels will be checked!

# If no channels should be ignored, set no channels here and select the channel list mode ignore!

mute_channel_list = 

# Select one of the two modes for the channel list.

# ignore = The selected channels will be ignored.

# only = Only the selected channels will be checked.

mute_channel_list_mode = ignore

# A comma separated list (without spaces) of server group ids.

# Depends on the given mode, this server groups can be ignored or only this server groups will be checked!

# If no server groups should be ignored, set no server groups here and select the group list mode ignore!

mute_group_list = 

# Select one of the two modes for the server group list.

# ignore = The selected server groups will be ignored.

# only = Only the selected server groups will be checked.

mute_group_list_mode = ignore

# Select the message mode, how the client should get the message.

# poke, chat or none are valid values!

mute_message_mode = none

# Path to file which contains the mute mover message

mute_file = config/mutemessages.cfg

 

# Select the action if a client starts recording, possible values: kick and move

record_action = kick

# If clients should be moved, set channel id to move recording clients into it

record_channel_id = 

# A comma separated list (without spaces) of channel ids.

# Depends on the given mode, this channels can be ignored or only this channels will be checked!

# If no channels should be ignored, set no channels here and select the channel list mode ignore!

record_channel_list = 

# Select one of the two modes for the channel list.

# ignore = The selected channels will be ignored.

# only = Only the selected channels will be checked.

record_channel_list_mode = ignore

# A comma separated list (without spaces) of server group ids.

# Depends on the given mode, this server groups can be ignored or only this server groups will be checked!

record_group_list = 

# Select one of the two modes for the server group list.

# ignore = The selected server groups will be ignored and are allowed to record.

# only = Only the selected server groups will be checked and punished, if they start recording.

# If no server groups should be ignored, set no server groups here and select the group list mode ignore!

record_group_list_mode = ignore

# A comma separated list (without spaces) of channel group ids.

# Depends on the given mode, this channel groups can be ignored or only this channel groups will be checked!

# If no channel groups should be ignored, set no channel groups here and select the group list mode ignore!

record_channelgroup_list = 

# Select one of the two modes for the channel group list.

# ignore = The selected channel groups will be ignored and are allowed to record.

# only = Only the selected channel groups will be checked and punished, if they start recording.

record_channelgroup_list_mode = ignore

# Add complain entry to the user? Set yes or no here!

record_add_complain = no

# If clients should be moved, select the message mode, how the client should get the message.

# poke, chat or none are valid values!

record_message_mode = poke

# Path to file which contains the record message

record_file = config/recordmessages.cfg

 

# A comma separated list (without spaces) of server group ids, which should be watched on joining.

servergroupnotify_groups = 

# A comma separated list (without spaces) of server group ids, which should be notified about joining clients.

servergroupnotify_grouptargets = 

# A comma separated list (without spaces) of channel ids.

# Depends on the given mode, target clients in this channels can be ignored or only clients in this channels receive the notify message!

# If no channels should be ignored, set no channels here and select the channel list mode ignore!

servergroupnotify_channel_list = 

# Select one of the two modes for the channel list.

# ignore = Clients in the selected channels will be ignored.

# only = Only clients in the selected channels receive the notify message.

servergroupnotify_channel_list_mode = ignore

# Select the message mode, how the notified clients should get the message.

# poke or chat are valid values!

servergroupnotify_message_mode = poke

# Select the message mode, how the clients (who joined the server) should get the message.

# poke, chat or none are valid values!

servergroupnotify_messagenotified_mode = none

# Path to file which contains the server group notify message

servergroupnotify_file = config/servergroupnotifymessages.cfg

 

# A comma separated list (without spaces) of server group ids, which should be protected.

servergroupprotection_groups = 

# Enable this to kick every client which using a protected server group and are not on the list of the bot, set yes or no here!

servergroupprotection_kick = yes

# Add complaint entry to the user, set yes or no here!

# This would only add a complaint, if the bot has to remove a server group.

servergroupprotection_add_complain = no

# If a client is listed in the servergroupprotection_file and miss a server group, they get added to the server group.

# This only works for normal server groups (clients do not get added to groups like Admin Server Query)! Set yes or no here!

servergroupprotection_add_missing_groups = yes

# Select the message mode, how the client should get the message (useless if kick is enabled).

# poke, chat or none are valid values!

servergroupprotection_message_mode = poke

# Path to file which contains the Server Group Protection client list and kick message.

servergroupprotection_file = config/servergroupprotection.cfg

 

# A comma separated list (without spaces) of server group ids.

# Depends on the given mode, this server groups can be ignored or only this server groups get this welcome message!

# If no server groups should be ignored, set no server groups here and select the group list mode ignore!

welcome_group_list = 

# Select one of the two modes for the server group list.

# ignore = The selected server groups will be ignored and don't get this welcome message.

# only = Only the selected server groups get this welcome message.

welcome_group_list_mode = ignore

# A comma separated list (without spaces) of the total connection count (it's the same value as %CLIENT_TOTALCONNECTIONS% at the welcome message),

# when this message should be send to the client. Set this to -1 to show it every time.

# Ranges like 1-100, -20 (means 20 or less) or 100- (means 100 or more) are also possible.

welcome_showonconnectionnumber = -1

# Select the message mode, how the client should get the message.

# poke or chat are valid values!

welcome_message_mode = chat

# Path to file which contains the welcome message.

welcome_file = config/welcomemessages.cfg

 

# A comma separated list (without spaces) of server group ids.

# Depends on the given mode, this server groups can be ignored or only this server groups get this welcome message!

# If no server groups should be ignored, set no server groups here and select the group list mode ignore!

welcome_guest_group_list = 

# Select one of the two modes for the server group list.

# ignore = The selected server groups will be ignored and don't get this welcome message.

# only = Only the selected server groups get this welcome message.

welcome_guest_group_list_mode = ignore

# A comma separated list (without spaces) of the total connection count (it's the same value as %CLIENT_TOTALCONNECTIONS% at the welcome message),

# when this message should be send to the client. Set this to -1 to show it every time.

welcome_guest_showonconnectionnumber = -1

# Select the message mode, how the client should get the message.

# poke or chat are valid values!

welcome_guest_message_mode = chat

# Path to file which contains the welcome message.

welcome_guest_file = config/welcomemessages.cfg

jest jeszcze 3 w config jts3servermod_instanceManager.cfg

# JTS3ServerMod Instance Manager config file

#

# Each bot instance need:

# X.instance_enable

# X.instance_name

# X.instance_config_path

#

# Optional:

# X.instance_logfile_path

# X.instance_csvloginlog_path

# X.instance_debug = 1

#

# For X use a number starting from 1. Make sure that you have not more than 10 missing numbers between the instances.

# At least one enabled instance is needed or the bot process will stop after starting.

#

# This file must be saved with the encoding ISO-8859-1!

 

# A comma seperated list (without spaces) of unique user ids,

# which should be able to use bot full admin commands on all bot instances.

# Bot full admin can also see the TS3 server password and is able to use the !exec command.

# The unique user ids looks like this: mBbHRXwDAG7R19Rv3PorhMwbZW4=

bot_fulladmin_list = 

# Allow !exec and !execwait commands for bot full admins? 1 = Yes, 0 = No

# This allow you to execute system commands.

# Only use !execwait for commands which quits within some seconds,

# because the bot waits for the end of this command to send you the text output of the program.

# Use !exec for commands with a longer runtime instead,

# this command don't send you any text output, because the bot don't wait for it.

bot_command_exec = 0

# Every time a bot full admin connects to the TS3 server it will be checked if an update for the JTS3ServerMod is available.

# If an update is available, a chat message will be sent to the bot full admin.

# 0 = disable, 1 = final versions, 2 = final and test versions

bot_update_check = 0

 

# Enable bot instance, 1 = yes, 0 = no

# If 0, you can start the virtual bot instance later by chat command from another running virtual bot instance.

1.instance_enable = 1

# The name is needed to start or stop this virtual bot instance by chat commands. This name has to be unique!

# Don't use spaces in the bot name, only use letters, numbers, minus and underscore!

1.instance_name = bot1

# Path to config file for this virtual bot instance.

1.instance_config_path = config/server1/JTS3ServerMod_server.cfg

# Path to log file for this virtual bot instance. Leave empty to disable file logging.

1.instance_logfile_path = JTS3ServerMod_server1.log

# Path to connection log file for this virtual bot instance. Will be saved in csv format. Leave empty to disable file logging.

# This function creates a CSV file, which logs when which client (including IP address) connects to the TS3 server.

1.instance_csvloginlog_path = JTS3ServerMod_server1_login.csv

 

 

tutaj są pliki dla ułatwienia. Czy mógł by ktoś pomóc tak dobrowolnie ?

[Itan]

Nie wiem, po co dodajesz drugi podobny temat dotyczący jednego problemu (tego samego). Jutro wrzucę Ci opis podanych config(ów), tak jak pisałem.

 

Temat

-> http://www.mpcforum.pl/topic/1470236-pomoc-przy-nowej-wersji-jts3bot/